Kingston Hyperx Fury Rgb 480 Gb 25 Solid State Drive Review

The "RGB everything" trend has changed the pattern of almost every single estimator component/peripheral in contempo years. As a major PC gaming part manufacturer, Kingston/HyperX has introduced the Pulsefire Surge mouse (its review here), Alloy Elite RGB mechanical keyboard and more. Now, the new FURY RGB SATA SSD will be added to the existing lineup.

Specifications

The FURY RGB is using the ii.v-inch form factor. Merely it is slightly thicker and heavier than normal SSD at 9.5 mm and 165 grams, because of the added RGB LEDs.

The SSD is using the Marvell 88SS1074 controller and the Toshiba 64-layer 3D TLC NAND flash. In that location are 3 capacities to choose, including 240 GB, 480 GB and 960 GB. It has a rated MTBF at 1 million hours and TBW from 120 TB to 480 TB, depending on models.

Unboxing

The packaging of the FURY RGB has the clean design, with a mostly white groundwork and abrupt blood-red accents. A photo of the SSD is shown on the forepart, as well as the RGB lighting and 3D NAND logos.

A small cutout at the back let users to encounter the stickers on the SSD, which has the model number, capacity and serial number printed.

The FURY RGB comes with a bit more than accessories inside the box, in order to power and control the internal RGB LEDs. You get the usual HyperX'due south Thank You menu, an activation key of the Acronis True Image HD software and a quick start guide.

Not only that, an extra cable is included. On one cease, at that place is a micro-USB connector, which is used to plug into the side of the SSD. On the other terminate, it has a male person/female 4-pivot RGB LED connector, which is either used to plug directly to a supported motherboard/controller or daisy-chain with another LED light strip. Bear in heed though, the FURY RGB is only compatible with a 12 Five LED header.

HyperX FURY RGB SATA SSD

The FURY RGB SSD outer aluminium shell has a stealthy-looking gunmetal finish. A X-shaped metal painted in black is embedded in the center, with the "FURY" wordings. At that place are multiple cutouts on tiptop, including the HyperX logo, which the RGB lighting tin polish through them.

There is not much happening on the back. There are the same information sticker and a few screws that holds the casing together.

The SATA 3 connector at the bottom supports bandwidth up to 6 Gbps. The micro-USB port side by side to information technology is mainly used to adjust the built-in RGB lighting effects of the LEDs.

There are a thin metal layer with tiny holes in front of the LEDs, to give the lighting upshot a unique dotted look/design.

Review

Testing Methodology

To exam the functioning of the solid-state drive, we apply three well-established storage benchmarking software. They are CrystalDiskMark, ATTO Disk Benchmark, besides as As SSD Benchmark.

CrystalDiskMark can measure out both sequential and random 4KB read/write speeds with a queue depth of 32. ATTO Disk Benchmark tin test how the bulldoze performs across unlike transfer block sizes, mostly in a sequential surroundings. AS SSD Benchmark can provide both normal read/write speed and the IOPS performance of the drive.

We also recorded the time to transfer three files of 10 GB, 500 MB and 250 MB from a RAM disk to the SSD, which is used to simulate a real-world situation.

• CPU: Intel Core i5-8400 @ 2.ix GHz (65W TDP)
• Motherboard: ASRock Z370 Killer SLI
• RAM: HyperX Predator RGB DDR4-3600 sixteen GB kit (its review here)

Functioning

The FURY RGB has advertised sequential read and write speeds of 550 MB/south and 480 MB/south. The SSD did really well in CrystalDiskMark, which reached up to 561 MB/due south and 504 MB/southward respectively, saturating the SATA three interface. For random 4K with queue depth 32, the FURY RGB could have read and write speed at 301 MB/s and 278 MB/s.

When testing in AS SSD Benchmark, the sequential performance of the FURY RGB dropped a tiny fleck, at most 520 MB/southward for read and 490 MB/due south for write. Speeds climbed up to 309 MB/south and 319 MB/s respectively, when increasing the queue depth to 64 at 4K random operations.

IOPS number represents how well a drive handles random input and output operations. The FURY RGB scored 1063 in the test. Information technology achieved a 79145 and 81791 IOPS in random 4K operations, which is in line with most of the SATA-based SSDs in the market place.

Once the test file size increased to sixteen KB, the read speeds stabilised at around 490 MB/s up to 560 MB/s, while the write speeds fluctuated between 480 MB/due south and 520 MB/s.

The 3 files took a full of 41.28 seconds to copy from the RAM disk to the SSD. Subsequently the internal SLC cache was total, the speed decreased to effectually 200 MB/s.

Comparison

In CrystalDiskMark, the FURY RGB SSD performed similar to other SATA SSDs we tested in terms of sequential read and write. It did slightly worse in random 4K operations, only is still mode better than a traditional difficult disk bulldoze.

We saw an identical motion picture in the AS SSD Benchmark, which the FURY RGB edged out slightly for sequential read and write speeds. Random 4K performances are similar across the lath.

RGB Lighting

The RGB lighting upshot is controlled via the 4-pin LED connector, which is only uniform with 12 Five header. It supports most major motherboard vendors' software, including ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync.

The RGB lighting is diffused rather evenly and the colors are vibrant. The lighting is not dim, but tin can be slightly brighter. The number of lighting modes and furnishings will vary from different software.

Determination

The HyperX FURY RGB SSD is a decent performer with a eye-catching design on the exterior. It has similar read and write operation, when compared with other SATA-based SSDs. Information technology could achieve up to 550 MB/s in sequential read speed and 500 MB/south in write.

The added RGB lighting looks awesome in person, and contributes in making the SSD's unique appearance. The LEDs are bright plenty and the colors are bright.

The FURY RGB comes with a 3-year warranty, which is the manufacture standard. The inclusion of the RGB lighting does add a toll premium to the SSD. It costs $105.99 USD at the time of the review, which is 15% cheaper than the MSRP at $124.99 USD (for 480 GB). For at present, the FURY RGB is only $10 USD more expensive than the non-RGB Kingston UV500. Comparing to the TEAMGROUP T-Force Delta RGB, both have a very like MSRP at around $120 USD, but the DELTA RGB is now on sale for around $80 USD to $90 USD (for 500 GB).

In that location are not many RGB SSDs in the marketplace. Overall, if you like the blueprint of the FURY RGB and don't heed spending a trivial extra for the RGB lighting, I think yous would not be disappointed by it.

You can purchase the SSD from your local/online resellers or the links beneath from Amazon and Newegg.

• Amazon US: HyperX FURY RGB SATA SSD
• Newegg Usa: HyperX FURY RGB SATA SSD

Cheers Kingston/HyperX for providing u.s. the SSD for review. (Review Sample)

Feel free to leave comments below, if yous have any opinion nearly this website. Share the website around if you relish reading it. Subscribe to our Newsletter or follow our Google+, Facebook and Twitter.

Support this website simply by shopping in Amazon. Information technology will requite the states small kickbacks, if y'all use the above affiliate links to make any purchases, which will aid us grow.

lovettlabon1974.blogspot.com

Source: https://www.unbxtech.com/2019/01/unboxing-review-hyperx-fury-rgb-480gb-sata-ssd.html

Share this post